How to Install Fin on Starboard Race Board.
How to install your fins for Starboard SUP Astro Inflatable Boards
How to Install Fins on Starboard SUP Composite Boards.
This video explains how to install a Starboard fin for any composite (hard) board in the Starboard range.
• Starboard Hexcel Center Fin
• Starboard Side fin
• Screwdriver (Tiki Tool)
• Fin Screw
• Screw and Nut
Fin Installation instruction:
1. Start by having the screw, nut and Starboard center fin ready. Place the square nut into the center of the fin box. Slide the nut to the front of the box using the tiki tool.
2. Now insert the center fin into the fin box with the pins side in first. Slide the fin to the back of the box so it is firmly in position.
3. Place the screw into the fin and once aligned with the nut, tighten the screw.
4. Place the pin side of the fin into the fin box. Slide the rest of the fin into the box and then insert the screw so that is aligned with the nut and then fasten with the tiki tool.
5. Place the side fin into the side box with the flat side facing inwards.
6. Then start to tighten with the tiki fin key, making sure both screws are tight.
7. Repeat the same process for the other side fin.